Washer Code Fix

Home › Power & electronics

Samsung Washer 9C1 / 9E1 / UC / PF Error Code: Power & Voltage Problems

9C19C29E19E2UCPF2E19C119C29H1Plo
Fault code

Quick answer: The washer sees irregular electrical supply, or it lost power. PF is shown after a power cut, unplugging or a tripped breaker. It is a fault code, but often a power-supply issue.

Model noteModels used outside their country of origin may show this code because power grids and rules differ (Samsung US). WF455 lists 2E as high / low voltage. On some models 3E is also a voltage error, see the motor page.

What to check

  1. Plug the washer into its own circuit, not an extension cord.
  2. Check the power cord is plugged in properly and the socket works.
  3. UK guidance: check there is no extension cable or other appliance on the same lead; if there is still no power, the plug fuse may need replacing.
  4. Switch the washer off at the mains for 1 minute (or 2-3 minutes), restore power and run a new programme.

How to clear or reset it

After PF, power cycle the washer and start again. Samsung's US page says PF shows if power went out before it powered itself off.

When to call a technician

If the code continues, Samsung says to request service.

Safety

Do not use damaged cords or work on mains wiring yourself; use a qualified electrician for fuses or sockets.

Frequently asked questions

What does 9C1 mean on a Samsung washer?

The washer sees irregular electrical supply, or it lost power. PF is shown after a power cut, unplugging or a tripped breaker. It is a fault code, but often a power-supply issue.

How do I fix the 9C1 code?

1. Plug the washer into its own circuit, not an extension cord. 2. Check the power cord is plugged in properly and the socket works. 3. UK guidance: check there is no extension cable or other appliance on the same lead; if there is still no power, the plug fuse may need replacing. 4. Switch the washer off at the mains for 1 minute (or 2-3 minutes), restore power and run a new programme. After PF, power cycle the washer and start again. Samsung's US page says PF shows if power went out before it powered itself off.

Do I need a technician for 9C1?

If the code continues, Samsung says to request service.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.