Washer Code Fix

Home › Heating & temperature

Samsung Washer-Dryer HE2 Error Code: Dryer Overheating

HE2HE3
Fault code

Quick answer: On a Samsung washer-dryer, HE2 means the dryer section shut itself down for safety because it detected it was getting too hot. It is a fault code.

Region noteBased on the Samsung UK page and the Hong Kong page, which treats HE1 and HE2 as a heater error. The UK page lists HE3 as the steam function not operating normally (contact service).

What to check

  1. Switch the washer-dryer off at the power point for five minutes (Samsung Hong Kong).
  2. Switch it back on and try again.
  3. Note the code (HE1, HE2 or HE3) and your model number for service.

How to clear or reset it

Power off for five minutes, then power on.

When to call a technician

If it persists, Samsung Hong Kong says to call its support line, and the UK page says to contact the service centre for HE3.

Safety

Unplug the washer-dryer while it cools; do not open it up.

Frequently asked questions

What does HE2 mean on a Samsung washer?

On a Samsung washer-dryer, HE2 means the dryer section shut itself down for safety because it detected it was getting too hot. It is a fault code.

How do I fix the HE2 code?

1. Switch the washer-dryer off at the power point for five minutes (Samsung Hong Kong). 2. Switch it back on and try again. 3. Note the code (HE1, HE2 or HE3) and your model number for service. Power off for five minutes, then power on.

Do I need a technician for HE2?

If it persists, Samsung Hong Kong says to call its support line, and the UK page says to contact the service centre for HE3.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.