Washer Code Fix

Home › Motor & sensors

Samsung Washer PC / PE Error Code: Clutch Error

PCPEPC1PE1
Fault code

Quick answer: PC and PE mean the washer cannot detect the clutch position; PC1 and PE1 mean the clutch was detected but its hall signal went wrong. Both are fault codes.

Model noteA clutch is a top-load part. Samsung Australia has a separate clutch error entry; the UK page says to contact a service centre.

What to check

  1. Power the washer off for 2-3 minutes (Samsung's general steps for codes without a specific guide).
  2. Power it on and restart the cycle.
  3. If the code returns, note it and your model number.

How to clear or reset it

Power-cycle as above.

When to call a technician

Samsung UK says to contact the Samsung Service Centre for PC, PC1, PE and PE1; the US page says to request service if the error continues.

Safety

Unplug the washer before the restart; do not open the machine.

Frequently asked questions

What does PC mean on a Samsung washer?

PC and PE mean the washer cannot detect the clutch position; PC1 and PE1 mean the clutch was detected but its hall signal went wrong. Both are fault codes.

How do I fix the PC code?

1. Power the washer off for 2-3 minutes (Samsung's general steps for codes without a specific guide). 2. Power it on and restart the cycle. 3. If the code returns, note it and your model number. Power-cycle as above.

Do I need a technician for PC?

Samsung UK says to contact the Samsung Service Centre for PC, PC1, PE and PE1; the US page says to request service if the error continues.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.