Home › Door, lid & drawer
Samsung Washer dC / DC / dE Door Error Codes (dc = Unbalanced Load on Older Models)
Quick answer: The washer does not detect the door (or lid) as closed and locked, so it will not run or it stops. It is a fault code, but is often fixed by closing the door properly or freeing something caught in it.
What to check
- Check the latch is securely fixed and undamaged.
- Look for laundry or other items caught in the door and remove them.
- Close the door firmly until it is secured, then restart the cycle.
- If Child Lock is on and there is water in the tub, the code can appear even when you are not running a cycle. Samsung's US page says the washer drains the tub if the door is not closed or Child Lock is not switched off within about 30 seconds.
- FlexWash washers: 1dC4 appears if the small rubber button beside the upper washer's latch is missing. Samsung says replacing the button fixes it and service is not required.
How to clear or reset it
Switch the washer off for 2-3 minutes, switch it on and restart (DC1 and Australian guidance). On older models for FL or dS: close the lid tightly, restart, and for LO make sure the lid is firmly closed and power off and on.
When to call a technician
If the code cannot be cleared, or the door or latch is damaged, Samsung says to request service.
Safety
Do not force a locked door or lid open while the drum holds water. Unplug the washer before inspecting the latch.
Frequently asked questions
What does dC mean on a Samsung washer?
The washer does not detect the door (or lid) as closed and locked, so it will not run or it stops. It is a fault code, but is often fixed by closing the door properly or freeing something caught in it.
How do I fix the dC code?
1. Check the latch is securely fixed and undamaged. 2. Look for laundry or other items caught in the door and remove them. 3. Close the door firmly until it is secured, then restart the cycle. 4. If Child Lock is on and there is water in the tub, the code can appear even when you are not running a cycle. Samsung's US page says the washer drains the tub if the door is not closed or Child Lock is not switched off within about 30 seconds. 5. FlexWash washers: 1dC4 appears if the small rubber button beside the upper washer's latch is missing. Samsung says replacing the button fixes it and service is not required. Switch the washer off for 2-3 minutes, switch it on and restart (DC1 and Australian guidance). On older models for FL or dS: close the lid tightly, restart, and for LO make sure the lid is firmly closed and power off and on.
Do I need a technician for dC?
If the code cannot be cleared, or the door or latch is damaged, Samsung says to request service.
Related codes
Sources
- Samsung US: Washing machine information and error codes
- Samsung UK: What do the codes on my washing machine mean?
- Samsung UK: Information codes on my washing machine
- Samsung Australia: Washing machine error codes
- Samsung WA456 top-load user manual (information codes, pp. 33-34)
- Samsung WF455 front-load user manual (information codes, pp. 67-68)
- Samsung WF5500M front-load user manual (information codes, pp. 56-57)
- Samsung WF45T6000 front-load user manual (information codes, pp. 54-55)
Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.