Washer Code Fix

Home › Balance & spin

Samsung Washer UE / Ub / Ur Error Code: Unbalanced Load – How to Fix

UEUbU6Ur1 Ub1 U6E4dc
Not a fault - a load or hose condition

Quick answer: The washer sensed that the laundry is lumped unevenly in the drum, so it stopped or skipped the spin. This is a load problem, not a broken part. A Ur code just means the washer is retrying: it adds water, tries to rebalance and spins again, which makes the cycle longer.

Region / model noteE4 is the same unbalanced-load code on UK, Australian and Hong Kong pages. On older US models (WA456 top-load, WF455 front-load manuals) a lower-case "dc" also means unbalanced load. On newer front-loaders "DC" means the door is open instead, see the door code page.

What to check

  1. Open the door or lid and untangle the laundry, then spread it more evenly around the drum.
  2. Close the door and press Start (or Start/Pause) to run the spin again.
  3. Make sure the washer stands level on a flat, stable surface.
  4. UK guidance: a single heavy item such as a bath mat or large towel may not spin on its own, so add two or three more towels and run another spin.
  5. Australian guidance for front-loaders: press SPIN until the washer starts to drain so the cycle can finish and the door unlocks. If SPIN does nothing, Samsung says to emergency-drain the machine.

How to clear or reset it

No reset is needed for Ur, it is only a status message. For other codes, restart the cycle after rebalancing. One Samsung manual also allows powering off, waiting 2-3 minutes and powering back on.

When to call a technician

Samsung does not treat this as a fault. If it keeps happening with small, balanced loads on a level machine, Samsung's US page points to its "washer won't spin" guide, and Samsung's manuals say to contact a service centre if a code keeps appearing.

Safety

Power the washer off before reaching into the drum, and do not force a locked door open.

Frequently asked questions

What does UE mean on a Samsung washer?

The washer sensed that the laundry is lumped unevenly in the drum, so it stopped or skipped the spin. This is a load problem, not a broken part. A Ur code just means the washer is retrying: it adds water, tries to rebalance and spins again, which makes the cycle longer.

How do I fix the UE code?

1. Open the door or lid and untangle the laundry, then spread it more evenly around the drum. 2. Close the door and press Start (or Start/Pause) to run the spin again. 3. Make sure the washer stands level on a flat, stable surface. 4. UK guidance: a single heavy item such as a bath mat or large towel may not spin on its own, so add two or three more towels and run another spin. 5. Australian guidance for front-loaders: press SPIN until the washer starts to drain so the cycle can finish and the door unlocks. If SPIN does nothing, Samsung says to emergency-drain the machine. No reset is needed for Ur, it is only a status message. For other codes, restart the cycle after rebalancing. One Samsung manual also allows powering off, waiting 2-3 minutes and powering back on.

Do I need a technician for UE?

Samsung does not treat this as a fault. If it keeps happening with small, balanced loads on a level machine, Samsung's US page points to its "washer won't spin" guide, and Samsung's manuals say to contact a service centre if a code keeps appearing.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.