Washer Code Fix

Home › Filling & water supply

Samsung Washer 4C / 4E / nF Error Code: Water Not Filling – Meaning & Fixes

4C4EnFE11 4C
Fault code - often fixable at home

Quick answer: Water is not entering the washer properly. Most often the tap is shut, a hose is kinked or the inlet filter is clogged. It is a fault code, but you can usually check the causes yourself.

Region noteUK and Australian pages also use E1 for the same problem. On older US models (WA456, WF455 manuals) nF means the same thing; the washer drains for about 3 minutes and the Power button is disabled while it does. Australian models also list 7E under not filling, see the 7E page.

What to check

  1. Open both water taps fully and leave them open while the washer runs.
  2. Check the hot hose is on the hot inlet and the cold hose on the cold inlet, and that neither is bent or kinked. Samsung US says do not use Flood Safe hoses.
  3. Check water pressure and flow. Samsung UK gives 0.5-8 bar and at least 4 litres per minute.
  4. With the water off, remove the hoses and clean the mesh filters inside the inlets. Samsung UK says to clean them at least twice a year.
  5. Check the drain hose is inserted properly and not kinked. Leave the screw at the back that holds the drain hose in place. Samsung UK adds that a blocked detergent drawer can occasionally cause 4C.

How to clear or reset it

Unplug the washer or switch off its breaker for 1 minute, restore power and run a cycle. Samsung UK notes the buttons are disabled for about 3 minutes after this code appears.

When to call a technician

If the code continues after these checks, Samsung's US page says to request service.

Safety

Turn the water supply off before disconnecting hoses, and unplug the washer before working behind it.

Frequently asked questions

What does 4C mean on a Samsung washer?

Water is not entering the washer properly. Most often the tap is shut, a hose is kinked or the inlet filter is clogged. It is a fault code, but you can usually check the causes yourself.

How do I fix the 4C code?

1. Open both water taps fully and leave them open while the washer runs. 2. Check the hot hose is on the hot inlet and the cold hose on the cold inlet, and that neither is bent or kinked. Samsung US says do not use Flood Safe hoses. 3. Check water pressure and flow. Samsung UK gives 0.5-8 bar and at least 4 litres per minute. 4. With the water off, remove the hoses and clean the mesh filters inside the inlets. Samsung UK says to clean them at least twice a year. 5. Check the drain hose is inserted properly and not kinked. Leave the screw at the back that holds the drain hose in place. Samsung UK adds that a blocked detergent drawer can occasionally cause 4C. Unplug the washer or switch off its breaker for 1 minute, restore power and run a cycle. Samsung UK notes the buttons are disabled for about 3 minutes after this code appears.

Do I need a technician for 4C?

If the code continues after these checks, Samsung's US page says to request service.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.