Washer Code Fix

Home › Filling & water supply

Samsung Washer 4C2 / 4E2 / nF1 Error: Hot & Cold Hoses Swapped

4C24E2CE14C2nF14E14Ed
Not a fault - a load or hose condition

Quick answer: Very hot water is reaching the washer's cold inlet, almost always because the hot and cold hoses are swapped. Samsung's US page says this code does not mean service is needed.

Model noteOn the WA456 manual nF1 means the hot/cold hose connection is not correct. Do not confuse CE with the Cb calibration code.

What to check

  1. Turn the water off and look at the hose colours.
  2. Connect the cold supply to the cold inlet and the hot supply to the hot inlet, typically blue to blue and red to red.
  3. Tighten the cold hose securely.
  4. Turn the water on, switch the washer off and on, and restart the cycle.
  5. UK guidance: if the cold hose is on the hot tap, some cycles can deform laundry, so correct it before washing again.

How to clear or reset it

Power the washer off for 2-3 minutes, power it on and start a new cycle (newer manual).

When to call a technician

Samsung says this code does not indicate that service is needed. If it still appears after the hoses are corrected, Samsung's manuals say to contact a service centre when a code keeps appearing.

Safety

Turn the water supply off before moving hoses, and mop up any water.

Frequently asked questions

What does 4C2 mean on a Samsung washer?

Very hot water is reaching the washer's cold inlet, almost always because the hot and cold hoses are swapped. Samsung's US page says this code does not mean service is needed.

How do I fix the 4C2 code?

1. Turn the water off and look at the hose colours. 2. Connect the cold supply to the cold inlet and the hot supply to the hot inlet, typically blue to blue and red to red. 3. Tighten the cold hose securely. 4. Turn the water on, switch the washer off and on, and restart the cycle. 5. UK guidance: if the cold hose is on the hot tap, some cycles can deform laundry, so correct it before washing again. Power the washer off for 2-3 minutes, power it on and start a new cycle (newer manual).

Do I need a technician for 4C2?

Samsung says this code does not indicate that service is needed. If it still appears after the hoses are corrected, Samsung's manuals say to contact a service centre when a code keeps appearing.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.