Home › Draining
Samsung Washer 5E / nd / 5C Error Code (and E2 on UK/AU Models): Not Draining - Fixes
Quick answer: The washer is not draining water at the right speed, or not at all. It is a fault code, but the cause is often a kinked or clogged hose or a dirty drain filter that you can check yourself.
What to check
- Check the drain hose is not kinked, clogged or frozen and runs straight to the drain connection.
- Check the hose is positioned correctly for your connection type. UK guidance: the outlet should be at least 60 cm high. Australian guidance: a standpipe between 60 and 90 cm.
- On front-loaders, clean the drain pump (debris) filter, then restart the washer.
- Check the waste connection or standpipe for blockages.
- UK guidance: if water is left in the drum, use the emergency drain hose to empty it before cleaning the filter.
How to clear or reset it
Older models (nd): switch the washer off and on, select Spin Only, and press Start/Pause to drain. Otherwise, switch off for 2-3 minutes, power on and run a cycle; Samsung Australia says the washer should drain at the start of a test cycle.
When to call a technician
If the code returns or the water still will not drain after the hose and filter checks, Samsung's pages say to request service or contact a Samsung service centre.
Safety
Unplug the washer and turn the water off before pulling the machine out or opening the drain filter. Expect water to come out of the filter.
Frequently asked questions
What does 5E mean on a Samsung washer?
The washer is not draining water at the right speed, or not at all. It is a fault code, but the cause is often a kinked or clogged hose or a dirty drain filter that you can check yourself.
How do I fix the 5E code?
1. Check the drain hose is not kinked, clogged or frozen and runs straight to the drain connection. 2. Check the hose is positioned correctly for your connection type. UK guidance: the outlet should be at least 60 cm high. Australian guidance: a standpipe between 60 and 90 cm. 3. On front-loaders, clean the drain pump (debris) filter, then restart the washer. 4. Check the waste connection or standpipe for blockages. 5. UK guidance: if water is left in the drum, use the emergency drain hose to empty it before cleaning the filter. Older models (nd): switch the washer off and on, select Spin Only, and press Start/Pause to drain. Otherwise, switch off for 2-3 minutes, power on and run a cycle; Samsung Australia says the washer should drain at the start of a test cycle.
Do I need a technician for 5E?
If the code returns or the water still will not drain after the hose and filter checks, Samsung's pages say to request service or contact a Samsung service centre.
Related codes
Sources
- Samsung US: Washing machine information and error codes
- Samsung UK: What do the codes on my washing machine mean?
- Samsung UK: Information codes on my washing machine
- Samsung Australia: Washing machine error codes
- Samsung Australia: Resolve 5E error code
- Samsung Hong Kong: Washing machine error code
- Samsung WA456 top-load user manual (information codes, pp. 33-34)
- Samsung WF455 front-load user manual (information codes, pp. 67-68)
- Samsung WF5500M front-load user manual (information codes, pp. 56-57)
Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.