Washer Code Fix

Home › Leaks, water level & overflow

Samsung Washer LC / LE / 1C / 1E Error Codes: Leak, Low Water Level or Water Level Sensor

LCLC1LELE11C1E1 LC1 1C
Fault code

Quick answer: The washer detected moisture somewhere it should not be, a low water level, or a problem with its water-level sensor. These are fault codes. The meaning depends on the model, see below.

Model note: newer front-loaders (WF5500M, WF45T6000 manuals)1C = check the water-level sensor. LC = check for a water leak.
Model note: older models (WA456, WF455 manuals)LE = the washer tried to fill but did not reach the proper water level; Samsung says to call service. 1E = water-level sensor not working.
Region noteUK and Australian pages describe LC, LC1, LE and LE1 as a low water level or drain-hose issue. Samsung's US page groups 1C, 1E, LC, LE and LC1 as a water level or leakage error.

What to check

  1. Look for signs of a leak. Samsung notes that small leaks can go unnoticed, and fixing the leak fixes the code.
  2. Check the supply hoses and drain hose behind the washer for kinks. Leave the screw that holds the drain hose against the back of the washer in place; if the holder is missing, Samsung says service is required.
  3. UK pages: check the drain hose is at the right height and not blocked, and that nothing is leaking.
  4. Run an empty cycle with no detergent or softener and watch for suds. If suds appear, too much or non-HE detergent was used. Keep running empty cycles until no suds appear, then see if the code returns (Samsung US).
  5. If the washer drains water on its own after the code appears, wait for it to finish; Samsung says the Power and Start/Pause buttons may be disabled meanwhile.

How to clear or reset it

Switch the washer off, check for leaks, then power it back on (newer front-loaders). Others: power off for 1-3 minutes, restart and start a new programme.

When to call a technician

If no suds appear and the code continues, Samsung's US page says to request service. For sensor codes (1C, 1E) older manuals simply say to call for service.

Safety

Turn the water off and unplug the washer before checking for leaks behind or under it.

Frequently asked questions

What does LC mean on a Samsung washer?

The washer detected moisture somewhere it should not be, a low water level, or a problem with its water-level sensor. These are fault codes. The meaning depends on the model, see below.

How do I fix the LC code?

1. Look for signs of a leak. Samsung notes that small leaks can go unnoticed, and fixing the leak fixes the code. 2. Check the supply hoses and drain hose behind the washer for kinks. Leave the screw that holds the drain hose against the back of the washer in place; if the holder is missing, Samsung says service is required. 3. UK pages: check the drain hose is at the right height and not blocked, and that nothing is leaking. 4. Run an empty cycle with no detergent or softener and watch for suds. If suds appear, too much or non-HE detergent was used. Keep running empty cycles until no suds appear, then see if the code returns (Samsung US). 5. If the washer drains water on its own after the code appears, wait for it to finish; Samsung says the Power and Start/Pause buttons may be disabled meanwhile. Switch the washer off, check for leaks, then power it back on (newer front-loaders). Others: power off for 1-3 minutes, restart and start a new programme.

Do I need a technician for LC?

If no suds appear and the code continues, Samsung's US page says to request service. For sensor codes (1C, 1E) older manuals simply say to call for service.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.