Washer Code Fix

Home › Detergent & suds

Samsung Washer Sud / Sd Code: Too Many Suds – What It Means

SudSUdSd5UD5dSUdS5Ud5
Notice - not a fault

Quick answer: The washer detected too many suds. It pauses for a while to let them settle and then carries on by itself. Samsung says this code does not mean the washer needs service. It is caused by detergent use, and it may blink again at the end of the cycle as a reminder.

What to check

  1. Give it time: the cycle should resume on its own once the suds settle.
  2. Use the correct amount of high-efficiency (HE) detergent next time.
  3. UK guidance if it does not clear: run an Eco Drum Clean cycle or a 90 C cotton cycle with no detergent and no laundry.
  4. UK guidance: also check the drain pump filter, clean the water-supply hose mesh filter and run a spin cycle to drain. If powder detergent has built up, repeat the Eco Drum Clean cycle.
  5. Australian guidance for front-loaders: press SPIN until the washer drains so the cycle finishes and the door unlocks; if it does not respond, emergency-drain.

How to clear or reset it

Nothing to reset. Older manuals say that when washing ends, End and the Sud or Sd code blink in turn, and that it is not an error.

When to call a technician

Samsung says service is not needed for suds. If the code keeps recurring even after the cleaning cycles and filter checks above, Samsung's manuals say to contact a service centre when a code keeps appearing.

Safety

Do not open a locked front-load door with suds and water in the drum. Drain the washer first.

Frequently asked questions

What does Sud mean on a Samsung washer?

The washer detected too many suds. It pauses for a while to let them settle and then carries on by itself. Samsung says this code does not mean the washer needs service. It is caused by detergent use, and it may blink again at the end of the cycle as a reminder.

How do I fix the Sud code?

1. Give it time: the cycle should resume on its own once the suds settle. 2. Use the correct amount of high-efficiency (HE) detergent next time. 3. UK guidance if it does not clear: run an Eco Drum Clean cycle or a 90 C cotton cycle with no detergent and no laundry. 4. UK guidance: also check the drain pump filter, clean the water-supply hose mesh filter and run a spin cycle to drain. If powder detergent has built up, repeat the Eco Drum Clean cycle. 5. Australian guidance for front-loaders: press SPIN until the washer drains so the cycle finishes and the door unlocks; if it does not respond, emergency-drain. Nothing to reset. Older manuals say that when washing ends, End and the Sud or Sd code blink in turn, and that it is not an error.

Do I need a technician for Sud?

Samsung says service is not needed for suds. If the code keeps recurring even after the cleaning cycles and filter checks above, Samsung's manuals say to contact a service centre when a code keeps appearing.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.