Washer Code Fix

Home › Leaks, water level & overflow

Samsung Washer OC / OE / E3 Error Code: Overflow (OE Means Water Level Sensor on Older Models)

OCOEOFE3
Fault code

Quick answer: The washer thinks there is too much water in the tub, often from too much detergent or foam. Treat it as a fault code that may clear itself once the pump drains the machine.

Model noteOn the older WA456 and WF455 manuals, OE means a fault in the water-level sensor and Samsung says to call for service. On newer front-load manuals (WF5500M, WF45T6000), OC means water may overflow.
Region noteE3 means overflow on Samsung's UK table, and on the Hong Kong page as water overfull or foam during the unbalance cycle. Samsung's US page lists E3 under motor errors, see the motor page.

What to check

  1. Switch the washer off at the power and wait 1 minute, then switch it back on; the drain pump should empty the washer (UK).
  2. Think about detergent: UK guidance says too much powder or liquid may have been added.
  3. Australian guidance: check the level, make sure the drain hose is at the right height with no kinks or damage, and on a front-loader clean the debris filter.
  4. Restart a cycle after spinning or draining and see if the code clears.
  5. Newer manuals for OC say to close the water valve and call for service.

How to clear or reset it

Power off for 1 minute and back on so the pump drains; restart the cycle.

When to call a technician

If the code does not clear, Samsung Australia says to get in touch for an assessment, and the newer manuals for OC say to close the water valve and call for service.

Safety

Close the water valve if you suspect a real overflow, and unplug the washer before checking behind it.

Frequently asked questions

What does OC mean on a Samsung washer?

The washer thinks there is too much water in the tub, often from too much detergent or foam. Treat it as a fault code that may clear itself once the pump drains the machine.

How do I fix the OC code?

1. Switch the washer off at the power and wait 1 minute, then switch it back on; the drain pump should empty the washer (UK). 2. Think about detergent: UK guidance says too much powder or liquid may have been added. 3. Australian guidance: check the level, make sure the drain hose is at the right height with no kinks or damage, and on a front-loader clean the debris filter. 4. Restart a cycle after spinning or draining and see if the code clears. 5. Newer manuals for OC say to close the water valve and call for service. Power off for 1 minute and back on so the pump drains; restart the cycle.

Do I need a technician for OC?

If the code does not clear, Samsung Australia says to get in touch for an assessment, and the newer manuals for OC say to close the water valve and call for service.

Related codes

Sources

Summarised and paraphrased from the sources above; last reviewed 2026-11-19. Your model may differ: always check your own user manual. See the disclaimer.